Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
The emd 645 series was an evolution of the earlier 567 series and a precursor to the later 710 series. When the 645 prime mover entered production in 1965, a large series of new locomotive models was introduced. The turbocharged version was used in EMD's 40 Series (GP40, SD40 and SD45) in 3,000 horsepower (2,200 kW), sixteen-cylinder form and in 3,600 horsepower (2,700 kW), twenty-cylinder form. EMD also introduced the Roots-blown 38 Series (GP38, SD38) and turbocharged, twelve-cylinder 39 Series (GP39, SD39). All of these locomotive models extensively share common components and subsystems, thereby significantly reducing cost and increasing interchangeability. The GP38-2 and SD40-2 became the most popular models of the series and among the most popular locomotive models ever built.
This sound file would be appropriate for the following locomotives:
GP40
GP40P
GP40P-2
GP40-2
GP40X
SD40X
SD40A
SD45T-2
SD40-2
SD40-2W
SD40-2S
F40C
F40PH
F40PH-2
F40PH-2M
SDP40F
SD40-2F
Export locomotives:
GT26MC
GT26CW
GT26CW-1
GT26CW-2
GT26CU-2
Please note:
This file contains a "Class Light" feature which allows for Cycling Aux3, Aux4, and Aux5 when using a 21MTC decoder. Assign the "Class Light" "Sound" to the function button of your choice and and be sure each Aux listed above is set to "Dimmable Headlight".
File also contains a "low Idle" Mode on F4 when Standing Still.
Pressing F4 while not moving will lower the prime mover and lock the motor. F4 must be turned off to go to "regular idle" and begin moving.
Once moving, F4 becomes the Dynamic Brake.
Please Note:
File Contains a Modern E-Bell, and MILW E-Bell and a Gong Bell which can be selected in Function Mapping. Simply choose the appropriate Sound Slot for F1.
Sound Slot 4 is the default bell (changable with CV48)
Sound Slot 9 is the Modern E-Bell
Sound Slot 22 is the MILW E-Bell
Sound Slot 23 is the Gong Bell
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/
