Further information

Technical data LokPilot micro V4.0 DCC

Operation modes: NMRA/DCC with 14, 28 and 128 speed steps, prepared for DCC RailComPlus® communication.
  DCC 2-digit and 4-digit addresses (long and short)
  Analog DC (de-selectable)
  Automatic recognition of operational mode and DCC speed step selection.
  Supports Lenz® LG100, Lenz® ABC brake mode and Roco® braking sections
  Wrong-direction bit / stores operational status
  Switching speed and acceleration as well as deceleration key selectable
Throttle: 0.75 A continuous load
  Runs DC and coreless motors
  Silent, safe 20 / 40 kHz pulse width frequency motor regulation
  Motor terminal overload protected. Fifth generation load back EMF (de-selectable).
Function outputs: 2 outputs; 150mA load per output
  approx. 280mA total load of all function outputs. Outputs short circuit protected
  2 logic outputs; Connection for »PowerPack«
  Free function allocation (function mapping)
Dimensions: 10.5mm x 8.1mm x 2.8mm (Next18: 15.0mm x 9.5mm x 2.8mm)