| Operational modes: | NMRA/DCC with 14, 28 and 128 speed steps, armed for DCC duplex RailCom® communication |
| DCC 2- and 4-digit addresses (short and long addresses) | |
| Digital Motorola® (old and new), up to 255 addresses in Motorola® use | |
| Selectrix® operational mode | |
| Analog DC (de-selectable). Analog AC (de-selectable) | |
| Automatic recognition of operational mode and DCC speed step selection | |
| Supports Lenz® LG100, Märklin®, Roco® braking sections and ZIMO® HLU commands | |
| Base-direction bit / stores operational mode | |
| Intelligent programming mode with Märklin® 6021® | |
| Switching speed and acceleration as well as deceleration key selectable | |
| Throttle: | 3.0 A continuous load |
| Runs DC, coreless and AC motors (with permanent magnet) | |
| Silent, safe 16 / 32 kHz pulse width frequency motor regulation | |
| Motor output overload protection. Forth generation back EMF (de-selectable) | |
| Function outputs: | 8 outputs |
| 600mA load per output | |
| Approx. 2000mA total load of all function outputs | |
| Free function allocation (function mapping) | |
| Power management: | Attached "PowerPack" energy store to bridge currentless sections |
| Dimensions: | 55mm x 25mm x 10mm (2.28 x 1.06 x 0.39 inch) |
The decoder can be used on Selectrix® layouts. Programming in DCC mode only. Programming with exclusive Selectrix® devices not possible.