| Operational modes: | NMRA/DCC with 14, 28, 128 speed steps (NO Analog AC!!) |
| DCC 2-digit and 4-digit addresses | |
| Digital Motorola® (old and new), up tp 28 speed steps and 127 addresses for Motorola® operation | |
| Selectrix® | |
| Analog DC (de-selectable). | |
| Automatic recognition of operational mode and DCC speed step selection | |
| Supports Lenz® LG100, Märklin®, Roco® braking sections | |
| Wrong-direction bit / Storage of operational modes (Memory) | |
| Intelligent programming mode with Märklin® 6021® | |
| Throttle: | 0.5 A continuous load |
| Runs DC and coreless motors | |
| Silent, safe 16 / 32 kHz pulse width frequency motor regulation | |
| Overload protection of motor output. Fourth generation back EMF (de-selectable) | |
| Function outputs: | 4 outputs |
| 180mA load per output | |
| Approx. 350mA total load of all function outputs. Outputs short circuit protected. | |
| Free function allocation (function mapping). F0 - F20 possible. | |
| Sound features: | 4 (!) independent sound channels |
| High performance bridge tie load amplifier, approx. 0.5 Watt | |
| Sound data in memory changeable | |
| Modes for steam engines, diesel hydraulic locos, diesel electrical locos, Electro locos | |
| 16 MBit storage capacity (up to 65 seconds) | |
| Loud speaker: | Special high-quality speaker 100 ohm, 16 x 25 mm (0.6 x 1.0 inch) included |
| Dimensions: | 28.0mm x 10.5mm x 5.0mm (1.12 x 0.39 x 0.2 inch) |
Please note:
Decoder can be used on Selectrix® layouts. Programming in DCC mode only. Programming with exclusive Selectrix® devices not possible.