| Operational modes: | NMRA/DCC with 14, 28, 128 speed steps |
| DCC 2-digit and 4-digit addresses | |
| Digital Motorola® (old and new), up to 127 speed steps for Motorola® operation | |
| Analog DC (de-selectable). Analog AC (de-selectable) | |
| Auto-recognition of operational mode and DCC speed step selection | |
| Supports Lenz® LG100, Märklin®, Roco® braking selections | |
| Base-direction bit / Operational status storage | |
| Intelligent programming mode with Märklin® 6021® | |
| Throttle: | 1.1 A continuous load |
| Runs DC-, coreless-, and AC motors (with permanent magnet) | |
| Silent, safe 16 / 32 kHz pulse with frequency regulation of motor | |
| Overload protection of motor output. Fourth generation load-control (back EMF), de-selectable | |
| Function outputs: | 4 outputs, 2 of which for light function |
| 250mA load per output | |
| Total current of all function outputs approx. 500 mA | |
| Free function allocation (function mapping). F0 - F12 (V3.5 F0 - F20) possible | |
| Outputs short circuit proof | |
| Sound features: | 4 (!) independent sound channels |
| High performance bridge-tie amplifier, approx. 0.6 Watt | |
| sound data in memory unit changeable | |
| Modes for Steam engines, Diesel-hydraulic locos, Diesel-electrical locos, Electro-locos | |
| 8 MBit storage capacity (up to 65 seconds) | |
| Loudspeaker: | Special high-performance speaker, 100 Ohm, 23 mm (0.9 inch) with chamber included |
| Dimensions: | 31 x 15.5 x 6.5mm (1.24 x 0.62 x 0.26 inch) |
Please note:
Decoder can be used on Selectrix® layouts. Programming in DCC mode only. Programming with exclusive Selectrix® devices not possible.