Further information

Product description

FAQ

 

Instruction manual

Technical data - LokSound XL V4.0

Operational modes: NMRA/DCC with 14, 28, 128 speed steps and automatic RailComPlus® detection.
  DCC 2-digit and 4-digit addresses. Up to 28 functions in DCC operation.
  M4 data format with 128 speed steps and automatic recognition by appropriate command stations. Up to 16 functions in M4 operation
  Digital Motorola® (old and new), up to 28 drivesteps in Motorola® mode. Up to 255 addresses in Motorola® mode. Up to 4 addresses for function keys F5 to F15.
  Selectrix® operation with 31 speed steps. Extended functions for up to 8 function keys (suitable control station necessary).
  Analogue DC and AC operation (deactivation possible).
  Automatic recognition of the operating mode and the DCC drive step configuration.
  Supporting Lenz® LG100, Märklin®, Roco® braking modes. Supporting Lenz ABC brakes and Märklin® brake system
  Reverse bit
  Intelligent programming mode with Märklin® 6021®. Supporting programming modes for ROCO Lokmaus 2 and ROCO Multimouse.
Drive control bit: 4.0A continuous load
  Connection to DC-, AC-motors with permanent magnet
  Noiseless, motor saving control with 40 / 20 kHz pwm frequency
  Motor output protected against overload. Load control of the 5th generation (possible to deactivate) Dynamic Drive Control.
Function outputs: 12 amplified outputs
  max. 500mA load for each output
  Total current for all function outputs ca. 2000mA. Outputs short circuit protected
  4 servo outputs for common servos. 5V integrated power supply.
  Control impulse generation for external smoke generators (KM-1, Massoth)
Inputs: 3 digital inputs to trigger steam chuffs or sounds.
Sound unit: 8 (!) individual sound channels
  High power dual amplification with about 11 Watts output current
  Soundfiles in the internal flash memory modifiable
  Modes for Steam-, Dieselhydraulic- , Dieselelectric- , Electric locomotives, battery railcars, hybrid locomotives etc.
  32 MBit sound memory (up to 276 seconds)
  Connection for two independent loudspeakers
Total current decoder: 7A total current
Energy buffering: Integrated ESU PowerPack
Communication: Full RailComPlus® integration. Full M4 integration. Susi interface.
Loudspeakers: Impedance 4-32 Ohms, 8 Ohms recommended.
Dimensions: 51mm x 41mm x 14mm (2 x1.57 inches)