Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
Locomotives:
VO-1000
As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.
Prime Mover:
CV48=0
Uses our OLD-HORNS-AND-BELLS template...
Horns:
CV48=0 Nathan Single Chime
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast P5
CV48=5 Nathan K3HA
CV48=6 Leslie RS3L
CV48=7 Leslie S3L #1
CV48=8 Leslie A125
CV48=9 Leslie A200
CV48=10 Leslie RS3K
CV48=11 Hancock Air Whistle
CV48=12 Wabco E2
CV48=13 Nathan M3H
CV48=14 Leslie S2M
CV48=15 Leslie Dual A125-A200
Bells:
CV48=0 Bronze Bell
CV48=64 Steam Loco Rope Pull Bell
Add values from above for total CV48 value.
Default CV48 Value = 0
0 - Baldwin VO-1000
0 - Nathan Single Chime
0 - Bronze Bell
Total 0+0+0 = 0
Please note: Some VO-1000's had a Steam Engine type bell. We have included 2 different Bells for this. Some were rope pull, CV 48 Bell Value 64. And Some were Air Operated. For the Air Operated Steam Loco Bell please set the following CVs:
CV31 = 16, CV32 = 2
----------------------
CV302 = 0
CV304 = 32
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/
