The new LokProgrammer software 5.2.5 is now available for download. This includes firmware 5.9.159 for all LokSound 5 decoders. For the first time, it is now possible to adjust the desired acoustics to the speaker installed there using bass and treble control. Similar to what you are used to with a stereo system, the sound can be easily adjusted using just two controls (here: CV [...]
[more]
From now, the new LokProgrammer Software 5.2.4. is available for download.
The new LokProgrammer Software 5.2.4. contains firmware 5.8.156 for all LokSound 5 decoders. This firmware defines a new "Class Light Logic" function, which allows you to cycle through 2 or 3 lights one after the other using the same function key. CV199=1 or 2 defines the number of lights [...]
[more]
From now, the new LokProgrammer Software 5.2.3. is available for download.
The new LokProgrammer Software 5.2.3. contains firmware 5.7.151 for all LokSound 5 and LokPilot 5 decoders. This firmware adds two new Bits to CV 122: CV122.5 and CV122.6. Using CV122.5, you can tell the decoder to ignore the acceleration / deceleration values for sound control under analog operation. [...]
[more]
From now, LokProgrammer Software 5.2.1. is ready for download.
Software 5.2.1. contains Firmware 5.6.145 for LokSound 5 and LokPilot 5 decoders. This support new silicium revisons of the ARM controller we are using on the decoders. Further, the .NET framework is upgraded to version 4.8. This means that the LokProgrammer requires at lest Windows 7 (Service Pack 1) in the future. [...]
[more]
From now, LokProgrammer Software 5.1.9. is ready for download.
Software 5.1.9. contains Firmware 5.6.143 for LokSound 5 and LokPilot 5 decoders. The only change is to fix a bug in the initialization of the SUSI interface on decoders using Next 18 interface. It could happen that SUSI modules do not work or freeze after some bad track contact. This is in particular true for [...]
[more]
With a heavy heart we decided to cancel our participation in the Nürnberg toy fair 2022.
The decision was really not an easy one for us: After more than 21 successful trade fair participations since 1999, we had been looking forward to being able to hold personal conversations with you again. A reunion would have been very desirable and important.
From now on, LokProgrammer Software 5.1.6. is available for download.
The new firmware 5.6.142 for LokSound 5 and LokPilot 5 decoders adds Bit 4 to CV 122. This will enforce the slave communication to ESU locomotive motherboards on AUX3, AUX4 outputs. The otherwise automatic detection sometimes fails on older ESU locomotives (like BR151). Further, a new SBB light signal is added for the [...]
[more]
From now on, LokProgrammer Software 5.1.6. is available for download.
The new firmware 5.5.141 for LokSound 5 decoders will support a new brand of flash memory IC that will be used in the production of LokSound 5 decoders. This additional IC has to be used because of availability problems of the original flash IC brand Outlook and functions of these decoders is unchanged, but they need the new [...]
[more]
From now on, LokProgrammer Software 5.1.5. is available for download.
The new firmware 5.5.140 for LokPilot 5 decoders will support for a new revision of the CPU used for upcoming LokPilot 5 decoders. These will be using a new revision of the microcontroller. Outlook and functions of these decoders is unchanged, but they need the new verion 5.1.5 to be used. We highly recommend to update your [...]
[more]
From now on the LokProgrammer software is 5.1.4. available.
The new firmware 5.4.139 for the LokSound 5 and LokPilot 5 decoders adds three new CVs: using CV 114, the fade-in time can be defined, CV 115 controls the fade-out time for function outputs (of course only if "dimmable headlight (fade in/out)" was selected). By CV 131 you can now set the brightness that should be set [...]
[more]
Displaying results ###SPAN_BEGIN###%s to %s out of ###SPAN_BEGIN###%s
Deutsch
Stay up-to-date with our newsfeed.