ESU - Electronic Solutions Ulm GmbH & Co. KG: Adapter boards

Here you will find a selection of adapter boards for extending you decoders.

Adapter cable Next18 to open wires

This adapter cable allows decoders with a Next18 interface to be hardwired.
Adapter cable Next18 to 6pin

Using this flexible PCB, which can be folded and cut to length almost at will, you can easily install a modern decoder with a Next18 interface.
Adapter cable Next18 to 8pin

With the help of this flexible PCB, which can be folded and cut to length as needed, you can install a modern, compact N-scale decoder featuring a Next18 interface.
Adapter board Next18 to PluX16

Some N or TT scale vehicles are equipped with a PluX16 interface. Simply plug the adapter board between the locomotive and the vehicle to use a decoder with a Next18 interface.
Adapter board 18-pin Next-18 socket to RCN-114 MTC14

Using this adapter board, Minitrix® locomotives with MTC14 interface can finally be equipped with a LokSound decoder at your own discretion.
Adapter board with PowerPack for E24 Interface

This adapter board has an ESU PowerPack ‘On Board’.
Adapterboard Kato USA N WideBody for E24 Interface

This adapter board fits in such Kato (USA) N-gauge locomotives that have a wide body design .
Adapterboard E24 socket to open wires

The E24 adapter board is suitable if you want to digitize a very small locomotive without a digital interface using the LokSound 5 Nano.
Adapterboard BLI Steam with Paragon 3/4 Decoder

With the BLI Paragon 3/4 (P34) adapter board, H0 Scale locomotives from Broadway Limited (BLI) can finally be equipped with a LokSound 5 decoder.
Adapterboard E24 socket to PluX16

This adapter board can be connected to all decoders with an E24 connection and offers a PluX16 interface on the locomotive side.
Adapterboard Hübner Schienenbus

This adapter board is for owners of a Hübner railbus in track 1 (Art. No. 4070 or 4071) thought.
Adapterboard LokSound/LokPilot L

This adapter board ensures the convenient connection of your LokSound 5 L or LokPilot 5 L Decoders.
Next18 Adapter board 1

The Next18 adapter board is suitable if you digitize a very small locomotive without a digital interface want, but do not want to wire the decoder freely.
Adapter board 21MTC to Next18

This small adapter board is a practical helper to be able to equip some models (e.g. from Liliput) with a LokSound decoder.
Adapter board Next-18 socket to PluX12

This adapter board can be docked on all decoders with Next18 connection.
Blindplug for adapter board for LokSound L

On request, this dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems.
PluX22 adapter board 1

Our new adapter board 3 for decoders with PluX22 interface is best suited for everyone intending to digitise a loco.
JST Adapter

Perfect for Athearn (and others) this new 9 pin (female) 21MTC (Male) adaptor board allows 21MTC decoders to be easily added to your favorite locomotive.
Adapter board for LokSound L Select / LokSound L / LokPilot L

This adapter board provides the suitable connections for your new LokSound/LokPilot L decoder.
Change over of skis

You´d like to digitalise a rail car with two slider? Our ski change-over electronic will help you.
21MTC adapter board 3

This adapter board is meant for 21MTC decoders and is very easy to install.
21MTC adapter board 2

This adapter board is meant for 21MTC decoders and is very helpful for converting old Märklin® locomotives, when AUX3 and AUX4 are also needed.
21MTC adapter board

This adapter board meant for decoders helps you to convert your old Märklin locomotives.
I/O Expansion board

With this expansion board you can easily expand your LokPilot or LokSound decoder (with 21MTC interface!).
Adapter board with multi-pin plugs

Adapter board for LokSound XL with multi-pin plugs

Products