Further information

LokPilot XL V3.0 - Technical Data

Operational modes: DCC 14, 28, 128 speed steps
  DCC long and short addresses
  DCC traction address (Consist Mode)
  DCC LGB pulse control
  Automatic speed step detection
  Lenz® LG 100, ROCO® brake unit
  Lenz® ABC brake unit
  ZIMO® HLU commands
  DC analogue operation
  Motorola® 14 speed steps
  Motorola® 28 speed steps
  Motorola® address 1 - 80
  Motorola® address 1 - 127
  Motorola® address 1 - 255
  M4 data protocol (mfx® compatible)
  Märklin® brake unit
  AC analogue operation
  Automatic detection of operational mode
Throttle: DC and coreless motors, AC motors with magnet
  40,00 kHz PWM frequency
  Load control in digital operation
  Load control in analogue operation
  Adj. start / maximum speed in analogue operation
  Mass simulation for 14 speed step operation
  Autotune function for load control
  DDC (Dynamic Drive Control)
  4,0A continious motor current
  Short circuit protection
Function outputs: 8 amplified function outputs with short-circuit protection
  500mA current of each output
  4 servo outputs
  Separate output dimming
  Light effects like Blinking lights, Marslight, Fire box flickering etc.
  Time-controlled function outputs
  Function Mapping V4.0 ESU (F0 - F28)
  Function Mapping M4® compatible
  Shunting mode (de-selectable)
  ABV (de-selectable)
  Serial protocol (for SUSI)
DCC service mode programming modes: (Register Mode, Address Only, Direct Mode)
  DCC POM (Programming On the Main)
  Programming mode for Märklin® 6021
  M4® configuration on the main track
Specials: M4® feedback system
  RailCom® feedback system
  RailComPlus® automatic recognition
  Storage of current operational state (memory)
  Motorola® wrong-direction bit
  Integrated »PowerPack« energy storage
Dimensions in mm: 55,0x25,0x10

The decoder can be used on Selectrix® layouts. Programming in DCC mode only. Programming with exclusive Selectrix® devices not possible.