Further information

SwitchPilot - Technical data

Operational modes:

NMRA/DCC „Accessory decoder“ compatible. Motorola® with up to 127 addresses. K83 compatible. Powered either by command staton or separately DC - or AC source (transformer) up to 18V AC.

Transistor outputs:

8 Transistor outputs, 1.5A (2.0A) load per output , grouped by 4 double outputs. Outputs short circuit proof and protected against overlad.  Selectable switch pulse length from 0.1s to 1.0 s (or continous output). Flashing or cross fading also available.

Servo Control:

Controls up to 2 RC-Servos (Graupner® JR® or Futaba® compatible), 1.0ms to 2.0mS pulses, positive. Separately adjustuble lever spped and end positions.


8 feedback inputs, detects actual position of the switch points.

Display on ECoS screen.

Dimensions:95mm x 85mm x 22mm (3.74 inch x 3.35 inch x 0.87 inch)
Included:SwitchPilot 51800, detailed instruction manual