| Central unit: |
H4 booster with 3.0A continuous output-load |
| |
H4 output programming track with 0.25A |
| |
Connection for ECoSlink (slave jack, for ECoS connection) |
| |
Possibility to connect 5 IR receivers (4 connections for cable extension, 1 direct connection for plug on) |
| |
USB computer interface |
| |
Märklin® Motorola® old and new, with 14 or 28 speed steps ´ |
| |
DCC with 14, 28, 128 speed steps |
| |
Up to 9999 addresses in DCC operation; up to 21 functions per loco; in Motorola® operation up to 4 + 1 functions |
| |
Up to 255 addresses in Motorola® operation (depending on decoder available) |
| |
Märklin® Motorola® and DCC track formats to control magnetic accessories |
| |
Up to 40 loco objects and 100 switching objects possible. |
| |
All DCC service modes programming on programming track, POM (programming on the main). Programming of Motorola® decoders on programming track. |
| Remote control unit: |
Wireless bi-directional IR communication |
| |
Backlit FSTN LC dispay (custom designed); displays name of loco, speed, driving direction, state of function keys |
| |
11 function keys + shift key to activate 21 functions each per each |
| |
4 menu keys |
| |
Emergency stop and direction switch key |
| |
4-way joystick for speed control and loco selection |
| |
2 battery cases for rechargable batteries (current supply) |
| IR receiver: |
Wide range receiver including 5 IR transmitter diodes and 2 receivers |
| |
Direct connection possible or extension via 8-pin plug cable |
| |
Wall fastening possible |
| Included in delivery: |
Navigator central unit |
| |
IR receiver module |
| |
IR remote control unit |
| |
Adjustable power supply 15V-21V (90VA) |
| |
Terminals for mail track and programming track connection |
| |
Carrying strap for remote control unit |
| |
Set of 4 batteries (Alkaline, „AAA“) |
| |
Instruction manual |
Deutsch
